SK15 Halogen Infrared Heat Lamp: 1200W, 500mm for High-Speed Flash Cure Systems
We built the SK15 Halogen Infrared Heat Lamp for one reason: to nail that target line on your flash cure setup—without hesitation. Here’s the heart of it: 1200W packed into a 500mm quartz tube, sitting on a tough SK15 base. That combo gives you a heat source that’s small enough to squeeze into tight spots, yet strong enough to deliver the thermal punch you need for fast curing.
Power, Voltage, and Size—Kept Real
That 1200W rating isn’t just a number. It’s about packing serious heat density across the 500mm length, so you get a hot zone that’s even and consistent, without the lamp taking up more space than it should. The SK15 base keeps the whole thing compact, which matters when you’re trying to fit serious heat into a crowded cure station. Voltage? We make it fit your line. You spec it for the voltage you already run, so you don’t have to rework your power setup just to add a heat module. Now, high watt density means things run hot—especially the fixture and reflector area. So your machine needs to be ready for that heat. If it can shed it properly, the lamp performs the way it was meant to. If not, it’ll run hotter than it should.
Halogen, Quartz, and a Base That Can Take It
Halogen technology keeps the filament steady because the quartz envelope runs hot enough to keep those halogen compounds circulating. The payoff? More consistent output over the life of the lamp, and none of that sudden dimming you get with standard infrared lamps. The quartz tube is chosen because it can handle repeated heating and cooling without cracking. Thermal shock? It shrugs it off. And the SK15 base is a rugged, two-pin ceramic design built for the factory floor. It carries the current, holds alignment, and gives you a mounting interface you can rely on. In practice, that means fewer hot-spot connection failures and less downtime when you’re swapping lamps.
On the Floor, Where It Counts
Flash cure work demands heat—fast, on demand, not after a long warm-up. The 1200W, 500mm profile gives you a tight, controllable heat zone that jumps to temperature quickly and holds steady. That means faster line speeds and fewer rejects, especially when your cure window is narrow. And if you’re already running SK15-compatible fixtures, this lamp is a straight drop-in. No redesigning the machine. Wire it up, set the distance, and dial in the dwell time. What you get is high intensity, predictable performance, and a lamp that can handle the heat—day after day.